Monday, 17 June 2013

Waves in communication

Visible light is only one section of a wide variety of waves known as the electromagnetism spectrum

Other invisible waves allow us to perform many other function - perform X-rays, cook food, produce heat, transmit radio messages etc 

Waves transmit energy but not material 

Features of waves 



Wavelength - distance between two successive points on a wave

 Amplitude - distance from a midpoint of wave to its highest point 

Frequency - number of waves passing a fixed point for each second

There are two types of waves

Transverse - eg light waves 
The moving particles travel at right angles to the directional energy
Vibrate side to side
Travel quickly 
Can travel through a vacuum 

Longitudinal- eg sound, moving particles move backwards and forwards in the same direction as the energy is transferred,

- need as medium to travel through 
- vibrate back and forwards 
- eg move move a ruler over the edge of the table and bend it , this compresses air particles above the ruler and causes it to spread out and moves up and down the ruler 
- travels slowly - some of its energy is absorbed by the particles in medium

- waves have the ability to transfer energy from a to b without particles actually moving
- particles just vibrate - up and down for transverse, back and forward for longitudinal 


Light waves 

- light consists of electromagnetic waves travel at the speed of light - 300000 k. Per second
- range of colours we can see is called the visible spectrum - white light a mixture of all the colours 
Consists of waves of different wave lengths and frequencies 
- Ur is shorter than red  


Electromagnetic spectrum

GReview
 The electromagnetic spectrum is more familiar to you than you might think. The light that our eyes see is a part of electromagnetic spectrum, so is the microwave you use to heat your food.

This visible part of electromagnetic spectrum consists of the colours in the rainbow.
 
The waves in the electromagnetic spectrum vary in size.

Radio waves - have the longest wave length , these can be as long as a foot ball field or as short as a ball.

They carry waves for your television and mobile phones 


Micro waves - have wavelengths that can be measured in centimetres.
Microwaves are good for transmitting information from one place to another, they can be I referred with by smoke, rain or clouds. 

Infrared waves - infrared waves are thermal, in other words we experience it from heat. Eg fom sunlight, fires or radiation. 

Shorter, near Infrared waves are not hot at all. Humans may not be able to see infrared but snakes in the viper pit family can.

Red has the longest wave link and purple have the shortest. Visible light is the light you can see and eah colour has its own wave length and all together they are called white light. 

Ultraviolet - ultraviolet light had shorter wavelengths than visible light. 

X-rays - have shorter light rays then ultraviolet rays but has an increase in energy then ultra violet waves 

Gamma radiation - are the shortest wavelengths but have the most energy. We use them to kill off cancer cells , in nuclear bombs and atoms. When killing cancer cells you have to be careful to only shoot itat the cancer otherwise you will kill off good cells.


Wednesday, 12 June 2013

Electromagnetism

There is a connection between electricity and magnets. Electricity can make and a magnet can make electricity. Is connection is called electromagnetism. An electric current will cause a magnetic field. If the wire is looped,it will make a larger magnet. Electromagnets can be easily be turned on or off. They are used in speakers, electronic door latches, and vending machines. 

Door chimes - Door chimes have a coil of wire with a magnet riding inside. When someone pushes the button, they close a switch. A current flows through the coil and makes a magnetic field. This pushes the magnet, which strikes a chime, making sound. When the button is released, a spring pulls the magnet back and it strikes another chime.

Electricity - how it works

Electricity is moving electrons. It can be positive or negatively charged.

Electrons can be made to move by electric.

Electron flow = is called electricity

Magnet can generate electricity

Diffenerent bits of metal produce different electrical charges

Lightening is a form of static electricity.

And electron standing still it as an electric field and if its moving it has an magnetic field.
  
Metals have electrons that can be moved.

Wednesday, 5 June 2013

Ohms laws

Ohms law describes the relationship in a circuit between the resistance, voltage and current. 

Resistance = voltage 
                     Current 


Resister 1 Resister2
Voltage (v) Current (A) Ohm Current (A) Ohm
4 0
6
8
10
12

Results : the experiment failed and we did not get any results.



If resistance is increased and voltage remains the same as the current will decease.

If the voltage is increased and resistance remains the same the current will decease.

Tuesday, 4 June 2013

Questions

1) Which physical quantity is measured by a?

A) ammeter - in knots, miles/kms

B) voltmeter - A voltmeter is an instrument used for measuring electrical potential difference between two points in an electric circuit

2) Explain how anammeter must be connected in an electric circuit and state which terminal of the ammeter must be connected closest to the positive terminal of a battery. 

The ammeter is connected in a series circuit and is connected from positive to negative but some are connected from positive to positive.

3) Describe how a voltmeter must be connected to the part of a circuit across which the voltage is to be measured. 

In a parrellel circuit the voltmeter is connected.

4) Describe two cause so random errors that occur when reading scales to measure any physical quantity. 

1) When your measuring voltage the voltage may level can change.

2) The reading can be wrong.

5) Describe one way in which random errors 
can be reduced.  


Random errors can be reduced by repeating g steps to ensure the best results

6) Describe two causes of systematic errors when using a voltmeter or ammeter. 


Parallax errors caused by consistently reading the scale of an ammeter or voltmeter from one side instead of directly in front are systematic errors. An incorrect zero reading when there is no current or voltage, or uneven scales, are also systematic errors. 

7) Explain why voltmeters and ammeters have two or three scales. 

This allows you to measure different units on the same device.

8) Express an electric current of 0.350 AinmA 

350 mA

9) the voltmeter should be in a parrellel circuit. And the ammeter is in the wrong terminal.

Monday, 3 June 2013

Comparing circuits

Series circuits - circiuts where where the globes are connected in a straight line

- the voltage is split between the globes
- the current passes through all the globes
- he more globes there are, the more dimly the globes with glow
- if one globe blows, the rest will not work

Parallel circuits - circuits where each globe has its own supply of electricity and its own electricity and its own path

- current is evenly split between paths.
- each globe glows as brightly as eachother
- if one globe breaks u can still use the others

1 in series photo


2 in series 

3 in series, as you can see when you add another light the lights get dimmer and dimmer in the series circuit

Parrellel 

3 in parrellel as you can see in parrellel all the globes have the same brightness